2024 Vermeer® TG9000 Base
- Year 2024
- Make Vermeer®
- Model TG9000
- Engine C32
2024 Vermeer® TG9000 Base
2024 Vermeer® TG9000
When you need maximum power for your high-production grinding operation, the TG9000 is an ideal choice. The TG9000 features a large-diameter opening of 11 ft (3.4 m) inside the tub. The patented Series III duplex drum offers proven cutting performance and reversible hammers and tips that maximize the wear life of single-sided designs and make daily maintenance efficient.
Features may include:
Engine powerA CAT C32 Tier 4 Stage V engine provides 1,125 hp (838 kW) of power to meet your jobsite demands.
Optimal cutting performanceThe patented Series III duplex drum offers proven cutting performance, and reversible hammers and tips nearly double the wear life of single-sided designs, simplifying daily maintenance.
Jobsite safetyThe thrown object restraint system (TORS) reduces the amount and distance of thrown material debris and has a smooth underside of optimal material flow.
Precise placementThe radial stacking rear discharge conveyor oscillates 60 degrees, allowing the operator to place the processed material where they need it without moving the machine.
Convenient controlMake machine adjustments or monitor real-time performance and data via the machine control panel or the handheld transceiver remote.
High productionSmooth, 63-in (160-cm) belt enables high-volume product removal and is constructed of 0.5-in (1.3-cm) thick rubber to help resist tearing and puncturing.
Engine
Engine Manufacturer
CAT
Engine
C32
Emissions
Tier 4 Final/Stage V
Cylinder Liners
12
Engine Power
1125 hp
Engine Torque
4056 ft-lb
Air Cleaner
Three stages - pre-cleaner, primary element and secondary element
Oil Filter
Spin-on (2)
Cooling
Medium: Liquid
Fuel System
Fuel System
Max Consumption: 55.2 gph
Fuel Type
Ultra-low sulfur diesel
Drivetrain
Clutch
Hydraulic-operated wet clutch | Engagement: Switch or button
Drive System
Closed loop hydraulic, continuous sprocket | Chain: ANSI #160 roller chain | Tensioner: Compression spring | Motor: Hydraulic, low speed/high torque (qty 2) | Motor: Geroler
Drive Shaft
Custom | U - Joints: 10C, greaseable
Brakes
Brake System Type
Air actuated with spring-applied park brake
Wheels & Tires
Tires, Rear Specification
255/70R22.5 duals
Wheels
22.5-in x 8.25-in (57.2-cm x 21.1-cm) hub-piloted steel
Battery
Battery
Group 8-D, 1400 CCA (qty 2) | radio: AA (qty 6)
Electric
Alternator
24 V
Electrical
System Protection: Fused
Operational
Operating Speed
Drum: 1269 rpm | Tip: 12105 ft/min | Belt: Discharge - 0-1060 fpm (0-323 m/min); belly - 0-744 fpm (0-227 m/min) | Fan Series - FWD/REV: 1180 rpm/500 rpm
Operating Conditions
Screen Area: 5100 sq in
Performance
Noise Level
Sound power LwA = 118.4 dB(A), at the control panel = 86.4 dB(A)
Hydraulics
Hydraulic Type
System / clutch: Open loop / tub / fan: Closed loop
Pump Type
Gear / tub: Axial piston, variable displacement
Hydraulic Flow
Pump at Maximum RPM: 44.5 gpm / fan: 43.4 gpm / clutch: 10.1 gpm
Maximum Pressure
System relief: 3000 psi / tub: 4000 psi / fan: 5000 psi / clutch: 250 psi
Chassis
Frame Type
Bolt-in kingpin - 2 in (5.1 cm)
Lights and Safety
Safety Features
Thrown Object Restraint System: Pivoting tub cover assembly | Tub Cover Positions: Transport and operate with hydraulic lock
Lighting
Trailer Type: 12V incandescent
Dimensions
Dimensions
Air to Boil Temperature: 127 deg | Tub Table Thickness: 0.5 in (1.3 cm) | Table Tilt Degrees: 93 deg | Millbox Opening: 32 in x 70 in (81.3 cm x 177.8 cm) | Inside Diameter of Tub: 11 ft | Inside Flare Diameter - At Base of Tub: 11.4 ft | Inside Flare Diameter - At Tub Opening: 13 ft | Wall Thickness: .4 in | Wear Liner Thickness: .8 in | Drum Diameter: 28 in | Tip Diameter: 36.4 in | Drum Skin Thickness: 1.5 in | Bearing - Inner Race Diameter: 5.5 in | Center Retention Pin Dimensions: 2 in (5.1 cm) | Screen Dimensions: 72 in x 38 in x 1.0 in (182.9 cm x 96.5 cm Ø x 2.5 cm) | Breaker Bar Dimensions: 2.5 in x 4 in x 77 in (6.4 cm x 10.2 cm x 195.6 cm) | Distance - Screen to Millbox Wall: 19 in | Idler roller diameter: Discharge and belly - 10 in (25.4 cm) | Idler Roller Bearing: Discharge and belly - 2.93 in (4.9 cm), 4-bolt flange | Drive Roller Diameter: 14 in | Magnetic Drive Roller Diameter: 14 in | Swing arc: +/- 30 degrees, 60 degrees total | radio Operating Range: 300 ft (91.4 m)
Transport Length
Maximum: 46 ft
Length
Maximum - Conveyor Unfolded: 72 ft | Discharge - 30 ft (9.1 m)
Transport Width
Maximum: 11.9 ft
Transport Height
Maximum: 165 in
Depth, Maximum
of Tub: 4.6 ft
Height
Loading: 11.3 ft | Load: 13-18 ft (4-5.5 m)
Cutting Width
Drum: 64 in
Width
Belt width Discharge - 48 in (121.9 cm), belly - 60 in (152.4 cm)
Ground Clearance
9 in
Fan Diameter
60" (152.4 cm) Dia
Capacities
Fuel Capacity
Tank: 600 gal
Oil capacity
Volume with Filter: 72 qt
Features
Coolant Capacity (Engine and Radiator): 53 gal | Tub Capacity: 17 cu yd | Bearing - Dynamic Capacity: 228000 lbs | Tank: 20 gal
Hydraulic Capacity
Tank: 100 ga
Weights
Weight
Engine Option One: 106000 lbs | King pin - Engine option one: 35000 lbs | Axle: 71000 lbs | Screen: 500-800 lb (226-362 kg)
Features
Features
Fan: diameter, fixed pitch, hydraulic reverse, variable speed | Wall Type: Grade 50 plate | Tub Roller Quantity: Eight carrier, eight guide (qty 16) | Tub Agitators: 4 | Falling Object Protection at Control Station: Overhead and side protection | Number of Hammers: 10 | Number of Cutters: 20 | Cutter Block Types: Multiple styles, 2-bolt retention with 7/8-in (2.2-cm) UNC fasteners | Number of Wipers: 4 | Number of Sides: Four usable edges | Return Roller Quantity: 5 standard and 1 vibrating roller | Filtration Method: In-tank return filters (qty 2) | Number of Coolers: 1 | clutch Filtration Method: Spin-on pressure | clutch Number of Coolers: 1 | control Display Type: LCD multi-function | control Gauges: Tub pressure, conveyor pressure, auxiliary hydraulic pressure, clutch pressure | control Switches: Moisture proof, toggle style | radio Display Type: LCD multi-function | radio Switches: Sealed membrane | radio Channel Setting: 50 channels
Oil Type
Recommended: CAT DEO-ULS, API CJ-4, API CK-4 or ECF-3 10W-30/15W-40 | Recommended: Hy-power 68 | Recommended: VMF ultra gold
Construction Material
Tub Table Type: T1 steel | Wear Liner Type: Abrasion-resistant plate (AR400), hardfaced | Screen Type: AR400, reversible (qty 2) | Breaker Bar Type: T1 steel, repleaceable | Splice: Discharge and belly - Flexco R2 stainless steel
Bearing Hanger Type
Double row, spherical roller
Belt Type
Design: Discharge - 220# V-cleat, belly - 330# smooth
Axle Count
Quad-axle leaf spring