Current Vermeer® Recycling Horizontal-Grinders HG6000E

2024 Vermeer® HG6000E Hydraulic

2024 Vermeer® HG6000E Hydraulic

Swipe to View More

  • Year 2024
  • Make Vermeer®
  • Model HG6000E
Shop Vermeer® Pre-Owned
Product Details Specifications Photos
2024 Vermeer® HG6000E Hydraulic

2024 Vermeer® HG6000E Hydraulic

  • Year 2024
  • Manufacturer Vermeer®
  • Model Name HG6000E
  • Trim Name Hydraulic
  • Generic Type (Primary) Horizontal

2024 Vermeer® HG6000E Hydraulic

As your stationary operation looks to electric-power, Vermeer is your partner for the equipment expertise you need. The HG6000E horizontal grinder is powered by two electric motors providing a combined 700 hp (522 kW) to the mill.

Features may include:

Two electric motors

The HG6000E is powered by two electric motors that deliver a combined 600 hp (447 kW) to the mill. A separate 60-hp (44.7-kW) electric motor powers the pump for the hydraulic circuits, while a 2-hp (1.5-kW) electric motor is used to cool the hydraulic system.

Motor starter panel

The motor starter panel provides options to configure a control system that best fits your application - whether that’s a soft-start or VFD panel.

Series II duplex drum system

Improve cutting performance using the patented Series II duplex drum system designed with reversible hammers and tips to help reduce daily maintenance and nearly double wear life.

Dedicated chip drum

For enhanced flexibility with the HG6000E, a dedicated chip drum – adjustable for product size ranging from .125 in to 1.5 in (3.2 mm to 38.1 mm) - is available.

Open-ended, wide infeed tables

Maximize loading speed and productivity using the patented SmartGrind system and hydraulic feed roller down pressure. Open-ended, wide infeed tables are designed to make over-the-side loading easy and efficient.

Thrown object deflector (TOD)

Reduce the quantity and distance of thrown material debris with the TOD, strategically placed to reduce interference when loading over-length material.

Motor

Motor Type WEG W22
Motor Power 60 hp
Motor Torque Full Load: 175 ft-lb

Drivetrain

Drive System Type: Radial piston motor | Motor: Fixed displacement, Geroler | Planetary: Two options (HD - 26.18:1) (STD - 34.2:1) | Motor: Fixed displacement, Geroler | Motor Bearings: 1-15/16, 4-bolt flange

Suspension

Suspension Air-ride

Wheels & Tires

Tires, Rear Specification Option One: 255/70R22.5 Duals
Wheels 22.5"x 8.3" (57.2 cm x 21 cm) Hub piloted steel

Brakes

Brake System Type Air-actuated with spring-applied parking brake

Battery

Battery AA (qty 6)

Electric

Electrical 460 V | Frequency: 60 | Phase: 3 | System Voltage: 24V Machine Control Circuit | System Protection: Fused

Operational

Operating Speed Rated: 1775 rpm | Drum: 1.5 rpm | Tip: 1080 rpm | Belt: 780 ft/min
Operating Conditions Screen Area: 3317 sq in

Hydraulics

Hydraulic Type Open-loop, pressure- and flow-compensated | System: Open-loop
Pump Type Variable displacement, axial piston | Fixed displacement, gear pump
Hydraulic Flow Pump at Maximum RPM: 28.5/27.3 (60Hz/50Hz) | Pump at Maximum RPM: 23 gpm
Maximum Pressure System Relief: 4500 | System Relief: 3000

Chassis

Frame Type 364/5TS
Hitch/Type Fifth wheel

Lights and Safety

Lighting 12-24 V LED

Dimensions

Dimensions Full Load Amps: 68.3 | Locked Rotor Amps: 451 | Service Factor: 1.25 | Locked Rotor (%): 240 | Break Down: 260 | Nominal Efficiency: 95 | Power Factor: .87 | Infeed Roller Diameter: 36.1 in | Deflector Position: Variable | Drum Diameter: 5600 in | Tip Diameter: 28 in | Drum Skin Thickness: 62.4 in | Bearing - Inner Race Diameter: 5.5 in | Center Retention Pin Dimensions: 2" diameter (5.1 cm) | Screen Dimensions: 3/4" (1.9 cm) thick | Liner Dimensions: 1" thick (2.5 cm) | Anvil Dimensions: 22.8"x 4.1"x 80.8" (57.9 cm x 10.4 cm x 205.2 cm) | Idler Roller Diameter: 12 in | Idler Roller Bearing: 1-15/16, 4-bolt flange | Standard Drive Roller Diameter: 12.8 in | Magnetic Drive Roller Diameter: 12.8 in | Operating Range: Up to 300' (91.4 m)
Transport Length Maximum - Transport with Dolly: 45.8 ft
Length Maximum (Operation): 54.5 ft | Feed Table - Option One: 20 ft | Center Retention Pin Dimensions: 75.3" (191.3 cm) | Liner Dimensions: 65.4" (166.1 cm) | 81.3 ft
Transport Width Maximum Transport - with Dolly: 9.8 ft
Height 87.4 in | Loading: 7.6 ft | Maximum Feed: 32 in | Millbox Opening: 32" (81.3 cm) | Load: 14.5 ft
Width 158 in | Feed Table: 60 in | Infeed Roller: 56.8 in | Millbox Opening: 60" (152.4 cm) | | Liner Dimensions: 5.6" (14.2 cm) | 48 in
Depth, Maximum 24.1 in
Cutting Width Drum: 36.4 in
Ground Clearance Option One: 5.3 in

Capacities

Hydraulic Capacity Tank: 65 gal
Features per Axle: 20000 lbs

Weights

Weight 56000 lbs | Tongue - Engine Option 1 with olly: 21600 lbs | Axle Weight - Engine Option 1 with Dolly: 43400 lbs | Dolly: 9500 lbs | 55500 lbs | Rear Pad: 31600 lbs | Front Pad: 23900 lbs | Approximate: 869 lbs | 4100 lbs | Infeed Roller: 1300 lbs | Screen: 470 lbs

Features

Features Enclosure: TEFC | Duty Cycle: S1 | NEMA Design: B | Insulation Class: F | Ambient Temperature: 40 c | Added Items: Nema C Face Mount, Terminal Block | Tooth Design: Serrated bars | Number of Teeth: 13 bars | Number of Hammers: 10 | Number of Tips: 20 | Number of Screens: 2 | Number of Sides: 1 | Anvil Type: Fabricated steel with replaceable wear surfaces | Return Roller Quantity: 3 | Filtration Method: Dual in-tank return filters with suction strainer | Number of Coolers: 1 | Display Type: LCD | Switches: Moisture-proof, toggle style/Sealed membrane | Channel Setting: 50 channels | Number of Axles: 3
Construction Material Flare: Integrated with infeed | Steel | Drive Roller: Welded steel | Front Idler Roller: Self-cleaning steel auger | Infeed Floor: Welded steel with replaceable UHMW wear plates | Type: Fabricated steel | Screen Type: Fabricated out of abrasion resistant steel | Millbox Lid Liner Dimensions: Abrasion resistant steel | Splice: R2-stainless steel or Super splice
Conveyor Type Feed: Welded slat chain
Bearing Hanger Type Double row, spherical roller
Belt Type Design: 3 ply - 330# or straight warp single ply 330# both with V cleat
Oil Type Recommended: Vermeer HyPower 68

Product Photography

Advertised pricing excludes applicable taxes title and licensing and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.